Catalog
CMOS Latched ± 15 V 16 Channel Analog Multiplexer
| Part | Voltage - Supply, Dual (V±) [Min] | Voltage - Supply, Dual (V±) [Max] | Package / Case | Switch Time (Ton, Toff) (Max) [custom] | Switch Time (Ton, Toff) (Max) [custom] | Current - Leakage (IS(off)) (Max) | Multiplexer/Demultiplexer Circuit | Number of Circuits | Supplier Device Package | Channel-to-Channel Matching (ΔRon) | Voltage - Supply, Single (V+) [Max] | Voltage - Supply, Single (V+) [Min] | Channel Capacitance (CS(off), CD(off)) [custom] | Channel Capacitance (CS(off), CD(off)) [custom] | Mounting Type | On-State Resistance (Max) [Max] | Operating Temperature [Max] | Operating Temperature [Min] | Package / Case | Package / Case | Operating Temperature [Max] | Operating Temperature [Min] | Package / Case | Package / Case [x] | Package / Case [y] | Switch Circuit |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Analog Devices | -10.8 V | 16.5 V | 28-LCC (J-Lead) | 300 ns | 300 ns | 1 nA | 16:1 | 1 | 28-PLCC (11.51x11.51) | 22.5 Ohm | 16.5 V | 10.8 V | 44 pF | 5 pF | Surface Mount | 450 Ohm | 85 °C | -40 °C | ||||||||
Analog Devices | -10.8 V | 16.5 V | 28-LCC (J-Lead) | 300 ns | 300 ns | 1 nA | 16:1 | 1 | 28-PLCC (11.51x11.51) | 22.5 Ohm | 16.5 V | 10.8 V | 44 pF | 5 pF | Surface Mount | 450 Ohm | 85 °C | -40 °C | ||||||||
Analog Devices | -10.8 V | 16.5 V | 28-CDIP | 300 ns | 300 ns | 1 nA | 16:1 | 1 | 28-CDIP | 22.5 Ohm | 16.5 V | 10.8 V | 44 pF | 5 pF | Through Hole | 450 Ohm | 15.24 mm | 0.6 in | 125 °C | -55 °C | ||||||
Analog Devices | -10.8 V | 16.5 V | 28-DIP | 300 ns | 300 ns | 1 nA | 16:1 | 1 | 28-PDIP | 22.5 Ohm | 16.5 V | 10.8 V | 44 pF | 5 pF | Through Hole | 450 Ohm | 85 °C | -40 °C | 15.24 mm | 0.6 in | ||||||
Analog Devices | -10.8 V | 16.5 V | 28-SOIC | 300 ns | 300 ns | 1 nA | 16:1 | 1 | 28-SOIC | 22.5 Ohm | 16.5 V | 10.8 V | 44 pF | 5 pF | Surface Mount | 450 Ohm | 85 °C | -40 °C | 0.295 in | 7.5 mm | ||||||
Analog Devices | -10.8 V | 16.5 V | 28-LCC (J-Lead) | 300 ns | 300 ns | 1 nA | 16:1 | 1 | 28-PLCC (11.51x11.51) | 22.5 Ohm | 16.5 V | 10.8 V | 44 pF | 5 pF | Surface Mount | 450 Ohm | 85 °C | -40 °C | ||||||||
Analog Devices | -10.8 V | 16.5 V | 28-CDIP | 300 ns | 300 ns | 1 nA | 16:1 | 1 | 28-CDIP | 22.5 Ohm | 16.5 V | 10.8 V | 44 pF | 5 pF | Through Hole | 450 Ohm | 125 °C | -55 °C | 15.24 mm | 0.6 in | SP16T | |||||
Analog Devices | -10.8 V | 16.5 V | 28-LCC (J-Lead) | 300 ns | 300 ns | 1 nA | 16:1 | 1 | 28-PLCC (11.51x11.51) | 22.5 Ohm | 16.5 V | 10.8 V | 44 pF | 5 pF | Surface Mount | 450 Ohm | 85 °C | -40 °C |
Key Features
• 44 V Supply Maximum Ratings
• VSSto VDDAnalog Signal Range
• Single/Dual Supply Specifications
• Wide Supply Range (10.8 V to 16.5 V)
• Microprocessor Compatible (100nsWRPulse)
• Extended plastic temperature range (−40°C to +85°C)
• Low Leakage (20 pA typ)
• Low power dissipation (28 mW maximum)
• Available in PDIP, CERDIP, SOIC, and PLCC packages
• Superior Alternative to DG526
Description
AI
The ADG526A andADG527Aare CMOS monolithic analog multiplexers with 16 single channels and dual 8 channels, respectively. On-chip latches facilitate microprocessor interfacing.The ADG526A switches one of 16 inputs to a common output, depending on the state of four binary addresses and an enable input. The ADG527A switches one of eight differential inputs to a common differential output, depending on the state of three binary addresses and an enable input. Both devices have TTL and 5 V CMOS logic-compatible digital inputs.The ADG526A and ADG527A are designed on an enhanced LC2MOS process that gives an increased signal capability of VSSto VDDand enables operation over a wide range of supply voltages. The devices can comfortably operate anywhere in the 10.8 V to 16.5 V single- or dual-supply range. These multiplexers also feature high switching speeds and low RON.PRODUCT HIGHLIGHTSSingle- or Dual-Supply Specifications with a Wide Tolerance. The devices are specified in the 10.8 V to 16.5 V range for both single and dual supplies.Easily Interfaced. The ADG526A and ADG527A can be easily interfaced with microprocessors. TheWRsignal latches the state of the address control lines and the enable line. TheRSsignal clears both the address and enable data in the latches, resulting in no output (all switches off).RScan be tied to the microprocessor reset pin.Extended Signal Range. The enhanced LC2MOS processing results in a high breakdown and an increased analog signal range from VSSto VDD.Break-Before-Make Switching. Switches are guaranteed break-before-make so that input signals are protected against momentary shorting.Low Leakage. Leakage currents in the range of 20 pA make these multiplexers suitable for high precision circuits.APPLICATIONSData acquisition systemsCommunication systemsAutomatic test equipmentMicroprocessor controlled systems