LTC6908 Series

Resistor Set SOT-23 Oscillator with Spread Spectrum Modulation

Catalog

Resistor Set SOT-23 Oscillator with Spread Spectrum Modulation

Part	Operating Temperature [Max]	Operating Temperature [Min]	Type	Package / Case	Supplier Device Package	Voltage - Supply [Min]	Voltage - Supply [Max]	Frequency [Max]	Frequency [Min]	Current - Supply	Mounting Type
Analog Devices LTC6908CDCB-1#TRPBF	70 °C	0 °C	Oscillator Silicon	6-WFDFN Exposed Pad	6-DFN (2x3)	2.7 V	5.5 V	10 MHz	50 kHz	1.25 mA	Surface Mount
Analog Devices LTC6908HS6-1#WTRPBF	125 °C	-40 °C	Oscillator Silicon	SOT-23-6 Thin TSOT-23-6	TSOT-23-6	2.7 V	5.5 V	10 MHz	50 kHz	1.25 mA	Surface Mount
Analog Devices LTC6908CDCB-2#TRPBF	70 °C	0 °C	Oscillator Silicon	6-WFDFN Exposed Pad	6-DFN (2x3)	2.7 V	5.5 V	10 MHz	50 kHz	1.25 mA	Surface Mount
Analog Devices LTC6908CDCB-2#TRMPBF	70 °C	0 °C	Oscillator Silicon	6-WFDFN Exposed Pad	6-DFN (2x3)	2.7 V	5.5 V	10 MHz	50 kHz	1.25 mA	Surface Mount
Analog Devices LTC6908HS6-2#WTRPBF	125 °C	-40 °C	Oscillator Silicon	SOT-23-6 Thin TSOT-23-6	TSOT-23-6	2.7 V	5.5 V	10 MHz	50 kHz	1.25 mA	Surface Mount

Catalog

Resistor Set SOT-23 Oscillator with Spread Spectrum Modulation

Key Features

• LTC6908-1: Complementary Outputs (0°/180°)

• LTC6908-2: Quadrature Outputs (0°/90°)

• 50kHz to 10MHz Frequency Range

• One External Resistor Sets the Frequency

• Optional Spread Spectrum Frequency Modulation for Improved EMC Performance

• ±10% Frequency Spreading

• 400µA Supply Current Typical (V+= 5V, 50kHz)

• Frequency Error ≤1.5% Max (TA= 25°C, V+= 3V)

• ±40ppm/°C Temperature Stability

• Fast Start-Up Time: 260µs Typical (1MHz)

• Outputs Muted Until Stable

• Operates from a Single 2.7V to 5.5V Supply

• Available in Low Profile (1mm) ThinSOT and DFN (2mm × 3mm) Packages

• AEC-Q100 Qualified for Automotive Applications

Description

The LTC6908 is an easy-to-use precision oscillator that provides 2-outputs, shifted by either 180° or 90°. The oscillator frequency is programmed by a single external resistor (RSET) and spread spectrum frequency modulation (SSFM) can be activated for improved electromagnetic compatibility (EMC) performance.The LTC6908 operates with a single 2.7V to 5.5V supply and provides rail-to-rail, 50% duty cycle square wave outputs. A single resistor from 10k to 2M is used to select an oscillator frequency from 50kHz to 10MHz (5V supply). The oscillator can be easily programmed using the simple formula outlined below:fOUT=10MHz • 10k/RSETThe LTC6908’s SSFM capability modulates the output frequency by a pseudorandom noise (PRN) signal to decrease the peak electromagnetic radiation level and improve EMC performance. The amount of frequency spreading is fixed at ±10% of the center frequency. When SSFM is enabled, the rate of modulation is selected by the user. The three possible modulation rates are fOUT/16, fOUT/32 and fOUT/64.ApplicationsSwitching Power Supply Clock ReferencePortable and Battery-Powered EquipmentPrecision Programmable OscillatorCharge Pump Driver