UCC27288 Series
2.5-A to 3.5-A 120-V half-bridge driver with 8-V UVLO and no internal bootstrap diode
Manufacturer: Texas Instruments
Catalog
2.5-A to 3.5-A 120-V half-bridge driver with 8-V UVLO and no internal bootstrap diode
| Part | Applications | Voltage - Supply [Min] | Voltage - Supply [Max] | Mounting Type | Interface | Voltage - Load [Min] | Voltage - Load [Max] | Supplier Device Package | Technology | Operating Temperature [Min] | Operating Temperature [Max] | Fault Protection | Features | Load Type | Package / Case | Package / Case [y] | Package / Case [x] | Current - Peak Output | Embedded | Primary Attributes | Primary Attributes | Supplied Contents | Type | Function | Utilized IC / Part |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments | DC Motors General Purpose | 8 V | 16 V | Surface Mount | Logic PWM SPI | 8 V | 16 V | 8-SOIC | Power MOSFET | -40 °C | 140 °C | Current Limiting Short Circuit UVLO | Bootstrap Circuit | Capacitive Inductive | 8-SOIC | 3.9 mm | 0.154 in | 2.5 A 3.5 A | |||||||
Texas Instruments | 2-Channel | 10 MHz 12 V | Board(s) | Power Management | Gate Driver | UCC27288 | |||||||||||||||||||
Texas Instruments | DC Motors General Purpose | 8 V | 16 V | Surface Mount | Analog Logic PWM | 8 V | 16 V | 8-SOIC | NMOS PMOS Power MOSFET | -40 °C | 125 °C | Current Limiting Short Circuit UVLO | Bootstrap Circuit | Capacitive Inductive Resistive | 8-SOIC | 3.9 mm | 0.154 in | 2.5 A 3.5 A |
Key Features
• Drives two N-channel MOSFETs in high-side low-side configuration16-ns typical propagation delay12-ns rise, 10-ns typical fall time with 1800-pF load1-ns typical delay matchingConfigurable external bootstrap diode8-V typical undervoltage lockoutAbsolute maximum negative voltage handling on inputs (–5 V)Absolute maximum negative voltage handling on HS (–14 V)±3-A peak output currentAbsolute maximum boot voltage 120 VInputs are independent of each other and VDDUnder voltage lockout for both channelsSpecified from –40°C to 140°C junction temperatureDrives two N-channel MOSFETs in high-side low-side configuration16-ns typical propagation delay12-ns rise, 10-ns typical fall time with 1800-pF load1-ns typical delay matchingConfigurable external bootstrap diode8-V typical undervoltage lockoutAbsolute maximum negative voltage handling on inputs (–5 V)Absolute maximum negative voltage handling on HS (–14 V)±3-A peak output currentAbsolute maximum boot voltage 120 VInputs are independent of each other and VDDUnder voltage lockout for both channelsSpecified from –40°C to 140°C junction temperature
Description
AI
The UCC27288 is a robust N-channel MOSFET driver with a maximum switch node (HS) voltage rating of 100 V. It allows for two N-channel MOSFETs to be controlled in half-bridge or synchronous buck configuration based topologies. Its 3-A peak source and sink current along with low pull-up and pull-down resistance allows the UCC27288 to drive large power MOSFETs with minimum switching losses during the transition of the MOSFET Miller plateau. Since the inputs are independent of the supply voltage, UCC27288 can be used in conjunction with both analog and digital controllers. Two inputs are completely independent of each other and therefore provides added control design flexibility.
The input pins as well as the HS pin are able to tolerate significant negative voltage, which improves system robustness. The inputs are completely independent of each other. This allows for control flexibility where two outputs can be overlapped by overlapping inputs if needed. Small propagation delay and delay matching specifications minimize the dead-time requirement which improves system efficiency.
Under voltage lockout (UVLO) is provided for both the high-side and low-side driver stages forcing the outputs low if the VDD voltage is below the specified threshold. No integrated bootstrap diode allows user to use application-appropriate external bootstrap diode. UCC27288 is offered in an SOIC8 package to improve system robustness in harsh environments.
The UCC27288 is a robust N-channel MOSFET driver with a maximum switch node (HS) voltage rating of 100 V. It allows for two N-channel MOSFETs to be controlled in half-bridge or synchronous buck configuration based topologies. Its 3-A peak source and sink current along with low pull-up and pull-down resistance allows the UCC27288 to drive large power MOSFETs with minimum switching losses during the transition of the MOSFET Miller plateau. Since the inputs are independent of the supply voltage, UCC27288 can be used in conjunction with both analog and digital controllers. Two inputs are completely independent of each other and therefore provides added control design flexibility.
The input pins as well as the HS pin are able to tolerate significant negative voltage, which improves system robustness. The inputs are completely independent of each other. This allows for control flexibility where two outputs can be overlapped by overlapping inputs if needed. Small propagation delay and delay matching specifications minimize the dead-time requirement which improves system efficiency.
Under voltage lockout (UVLO) is provided for both the high-side and low-side driver stages forcing the outputs low if the VDD voltage is below the specified threshold. No integrated bootstrap diode allows user to use application-appropriate external bootstrap diode. UCC27288 is offered in an SOIC8 package to improve system robustness in harsh environments.