F
Fabru GmbH
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
Beta
⌘K
| Series | Category | # Parts | Status | Description |
|---|---|---|---|---|
| Part | Spec A | Spec B | Spec C | Spec D | Description |
|---|---|---|---|---|---|
This manufacturer doesn't have any product series listed yet. Check back later or contact us if you're looking for specific parts.
| Part | Color | Operating Temperature [Min] | Operating Temperature [Max] | Filament Diameter [diameter] | Filament Diameter [diameter] | Density | Flex Strength | Filament Material | Operating Temperature [Max] [custom] | Operating Temperature [Min] [custom] |
|---|---|---|---|---|---|---|---|---|---|---|
Fabru GmbH | Blue (Sky Blue) | 210 °C | 260 ░C | 1.75 mm | 0.07 in | 1.07 g/cmģ | 45 Mpa | ASA (Acrylonitrile Styrene Acrylate) | ||
Fabru GmbH | White | 210 °C | 260 ░C | 1.75 mm | 0.07 in | 1.09 g/cmł | 54 Mpa | ABS (Acrylonitrile Butadiene Styrene) | ||
Fabru GmbH | Red (Neon Red) | 190 °C | 230 °C | 1.75 mm | 0.07 in | PLA (Polylactide) | ||||
Fabru GmbH | Gold (Bronze Gold) | 190 °C | 230 °C | 1.75 mm | 0.07 in | PLA (Polylactide) | ||||
Fabru GmbH | White | 1.75 mm | 0.07 in | 1.24 g/cmł | 58.9 Mpa | PLA (Polylactide) | 210 °C | 190 °C | ||
Fabru GmbH | Silver | 1.75 mm | 0.07 in | 1.24 g/cmł | 58.9 Mpa | PLA (Polylactide) | 210 °C | 190 °C | ||
Fabru GmbH | Gray (Charcoal Gray) | 210 °C | 260 ░C | 1.75 mm | 0.07 in | 1.29 g/cmģ | 50 Mpa | PETG (Polyethylene Terephthalate Glycol-modified) | ||
Fabru GmbH | Gray (Gray Metallic) | 1.75 mm | 0.07 in | 1.24 g/cmł | 58.9 Mpa | PLA (Polylactide) | 210 °C | 190 °C | ||
Fabru GmbH | Green | 200 °C | 260 ░C | 1.75 mm | 0.07 in | 1.24 g/cmł | 60 Mpa | PLA (Polylactide) | ||
Fabru GmbH | White | 190 °C | 230 °C | 1.75 mm | 0.07 in | 1.24 g/cmł | 60 Mpa | PLA (Polylactide) |