eSUN

Series List(0)

This manufacturer doesn't have any product series listed yet. Check back later or contact us if you're looking for specific parts.

Part	Color	Tensile Strength	Operating Temperature [Max]	Operating Temperature [Min]	Flex Strength	Filament Material	Density	Filament Diameter [diameter]	Filament Diameter [diameter]	Operating Temperature [custom]
eSUN PETG175SH1	Green (Solid Green)	52.2 Mpa	250 °C	230 °C	58.1 Mpa	PETG (Polyethylene Terephthalate Glycol-modified)	1.27 g/cm³	1.75 mm	0.07 in
eSUN PETG175SU1	Blue (Solid Blue)	52.2 Mpa	250 °C	230 °C	58.1 Mpa	PETG (Polyethylene Terephthalate Glycol-modified)	1.27 g/cm³	1.75 mm	0.07 in
eSUN PLA+175S1	Silver	63 Mpa	230 °C	210 °C	74 Mpa	PLA (Polylactide)	1.23 g/cm³	1.75 mm	0.07 in
eSUN ABS+175Y1	Yellow	40 Mpa			68 Mpa	ABS (Acrylonitrile Butadiene Styrene)	1.06 g/cm³	1.75 mm	0.07 in	230 °C 270 °C
eSUN PETG175N1	Natural	52.2 Mpa	250 °C	230 °C	58.1 Mpa	PETG (Polyethylene Terephthalate Glycol-modified)	1.27 g/cm³	1.75 mm	0.07 in
eSUN PLA+175BG1	Beige	63 Mpa	230 °C	210 °C	74 Mpa	PLA (Polylactide)	1.23 g/cm³	1.75 mm	0.07 in
eSUN PLA+175J1	Gold	63 Mpa	230 °C	210 °C	74 Mpa	PLA (Polylactide)	1.23 g/cm³	1.75 mm	0.07 in
eSUN ABS+175H1	Gray	40 Mpa			68 Mpa	ABS (Acrylonitrile Butadiene Styrene)	1.06 g/cm³	1.75 mm	0.07 in	230 °C 270 °C
eSUN ABS+175G1	Green	40 Mpa			68 Mpa	ABS (Acrylonitrile Butadiene Styrene)	1.06 g/cm³	1.75 mm	0.07 in	230 °C 270 °C
eSUN PETG175SR1	Red (Solid Red)	52.2 Mpa	250 °C	230 °C	58.1 Mpa	PETG (Polyethylene Terephthalate Glycol-modified)	1.27 g/cm³	1.75 mm	0.07 in